How to solve Error 65 and Err 66 Nice3000 Controller.
When troubleshooting Error 65 on a Monarch Nice3000 elevator controller, understanding its relationship with the UCMP (Unintended Car Movement Protection) function is essential. UCMP helps prevent accidental car movement by detecting any unexpected displacement. If detected, the control system stops output and reports Error 66, indicating a related fault.
Error 65: UCMP Detection Abnormal
- Cause: The UCMP function is activated, or accidental car movement occurs, leading to Error 65.
- Solution: Verify that the motor brake is fully engaged, preventing unintended movement. Ensure the car does not move unexpectedly when idle.
Error 66: Braking Force Detection Abnormal
This error can arise if the system detects insufficient braking force.
- Cause: Insufficient braking force detected.
- Solution: Check the brake clearance and make necessary adjustments to ensure adequate braking force. Proper calibration of the braking system will help prevent both Error 65 and Error 66.
In both cases, careful inspection of the braking system and adherence to manufacturer guidelines can help resolve these issues and prevent future faults.
Fault E65, E66 or E74 may be reported during the debugging or running elevator
Failure analysis :
UCMP Function : protectiin device to prevent accidentl movement of the car, and detect whether th car has moved through the MCTC SCB-A/A1/C module? When the system detect unexpected displacement, the control system immediately stop output and reports E66 fault.
Brake Force Detection: Through the output torque of the system, the brake does not open, and the pulse change detected? when the system test brake braking force fails, the control system immediately stop output and reports E66 fault.
E65 Troubleshooting
Faulty Code Name : UCMP Detection Abnormal.
Possible Causes : This fault is reported when the UCMP function is enabled or accidental car movement occurs.
Solution : Check that the motor brake is applied completely and th car will not move accidentally.
E66 Troubleshooting
Faulty Code Name : Braking force detection abnormal.
Possible Causes : The Braking force detected is in sufficien
Solution : Detect the brake clearance
E74 Troubleshooting
Faulty Code Name : STO Fault
Possible Causes : STO fault Subcode 1. STO Fault
Solution :
1. Check wheter the safety circuit isdisconnected.
2. Check wheter the door lock circuit isdisconnected.
3. Check wheter Y1 output is active
4. Check wheter the STO card is normal
Fault Err41 is not recorded in the elevator state
Fault Err41 is reset automatically when the door lock circuit is shorted or 1s after the fault occurs in the door zone.
if fault Err51, Err52 and Err57 persist, the are recorded once every one hour.
We are committed to sharing you more elevator and escalator knowledge.