To set up the UPS/ARD (Uninterruptible Power Supply/Automatic Rescue Device) for the NICE3000 elevator controller, follow these summarized steps based on the video tutorial.
Steps to Set Up UPS/ARD on NICE3000 Controller
- System Preparation: Ensure the UPS and ARD modules are installed and powered. Check that the NICE3000 controller is properly connected to handle emergency power from the UPS or ARD when a power failure occurs.
- Accessing Settings: Navigate to the NICE3000’s main control panel and enter the configuration menu. Within this menu, find the settings related to the UPS and ARD setup. These options allow you to set up the emergency functions to activate when primary power fails, which includes ensuring that the elevator moves safely to the nearest floor.
- Parameter Configuration: Set the controller parameters to manage the motor and braking functions when switching to UPS/ARD mode. This might involve selecting the appropriate motor type (such as AC or DC) and configuring the deceleration and stopping features in case of an emergency stop.
- Testing the Setup: After configuration, conduct a test by cutting off the primary power source briefly, ensuring the system shifts seamlessly to UPS/ARD mode. Observe if the elevator operates correctly, moves to the nearest floor, and opens the doors safely for passenger exit.
- Fine-Tuning and Safety Checks: Make final adjustments based on the test outcomes. Ensure compliance with safety regulations, as this system acts as a critical emergency response measure.
These instructions are a guideline; for full details, watch the tutorial here